AIR-AP4800-Q-K9C Specification |
Description | 802.11ac W2 Analytics AP w/CA; 4?3:3; Location; mGig -Q Domain, Configurable |
Software and supported wireless LAN controllers | ? Cisco Unified Wireless Network Software Release 8.7 or later ? Cisco 3500 Series Wireless Controllers, 5520 Series Wireless Controllers, 8540 Series Wireless Controllers, and Virtual Wireless Controller, Cisco 9800 series Wireless Controllers ? Cisco IOS ? XE Software Release 16.9 ? Cisco Catalyst ? 3850 Series and 3650 Series Switches |
802.11n version 2.0 (and related) capabilities | ? 4x4 MIMO with three spatial streams ? Maximal Ratio Combining (MRC) ? 802.11n and 802.11a/g beamforming ? 20- and 40-MHz channels ? PHY data rates up to 450 Mbps (40 MHz with 5 GHz) ? Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ? 802.11 Dynamic Frequency Selection (DFS) ? Cyclic Shift Diversity (CSD) support |
802.11ac Wave 1 capabilities | ? 4x4 MIMO with three spatial streams ? MRC ? 802.11ac beamforming ? 20-, 40-, and 80-MHz channels ? PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) ? Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ? 802.11 DFS ? CSD support |
802.11ac Wave 2 capabilities | ? 4x4 MU-MIMO with three spatial streams ? MRC ? 802.11ac beamforming ? 20-, 40-, 80, 160-MHz channels ? PHY data rates up to 5.2 Gbps ? Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ? 802.11 DFS ? CSD support |
Wi-Fi Alliance certifications | ? Wi-Fi Certified a, b, g, n, ac ? Wi-Fi Vantage ? Wi-Fi Multimedia (WMM) ? Passpoint |
Integrated antenna | Flexible radio (either 2.4 GHz or 5 GHz) ? 2.4 GHz, gain 2.5 dBi, internal antenna, omnidirectional in azimuth ? 5 GHz, gain 5 dBi, internal directional antenna, elevation plane beam width 90? Dedicated 5-GHz radio ? 5 GHz, gain 3.5 dBi, internal antenna, omnidirectional in azimuth Third dedicated radio ? 2.4 GHz and 5 GHz capable ? Hyperlocation antenna array BLE radio ? 2.4 GHz, gain 2.5 dBi, internal antenna, omnidirectional in azimuth |
Interfaces | ? 2 Ethernet ports ? 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) ? IEEE 802.3bz ? Category 5e cabling ? Higher-quality 10GBASE-T (Category 6/6a) cabling ? 100/1000BASE-T autosensing (RJ-45 AUX port) ? Management console port (RJ-45) |
Indicators | ? Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions (W x L x H) | ? Access point (without mounting brackets): 8.68 x 9.9 x 2.9 in. (22 x 25 x 7.35 cm) |
Weight | ? 5.6 lb (2.5 kg) |
Input power requirements | ? 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE ?) ? 802.3at power injector (AIR-PWRINJ6=) ? 50W power supply (AIR-PWR-50=) |
Power draw | ? 30W at the Power Source Equipment (PSE) with all features enabled except Multigigabit, AUX Ethernet, and USB support ? 31W at the PSE with full functionality |
Environmental | ? Nonoperating (storage) temperature: -22? to 158?F (-30? to 70?C) ? Nonoperating (storage) altitude test: 25?C, 15,000 ft ? Operating temperature: 32? to 104?F (0? to 40?C) ? Operating humidity: 10% to 90% percent (noncondensing) ? Operating altitude test: 40?C, 9843 ft. (noncondensing) |
System memory | ? 1024 MB DRAM ? 256 MB flash |
Available transmit power settings | 2.4 GHz ? 23 dBm (200 mW) ? 20 dBm (100 mW) ? 17 dBm (50 mW) ? 14 dBm (25 mW) ? 11 dBm (12.5 mW) ? 8 dBm (6.25 mW) ? 5 dBm (3.13 mW) ? 2 dBm (1.56 mW) 5 GHz ? 23 dBm (200 mW) ? 20 dBm (100 mW) ? 17 dBm (50 mW) ? 14 dBm (25 mW) ? 11 dBm (12.5 mW) ? 8 dBm (6.25 mW) ? 5 dBm (3.13 mW) ? 2 dBm (1.56 mW) |
Frequency band and 20-MHz operating channels | Q (Q regulatory domain): ? 2.412 to 2.472 GHz; 13 channels ? 5.180 to 5.320 GHz; 8 channels ? 5.500 to 5.700 GHz; 11 channels |