ASR-9006-AC - Cisco ASR 9000 Series ASR9006 6 x Expansion Slots 10U Rack-mountable Modular Expansion Base Chassis with PEM Version 2

ASR-9010-DC-V2 specifications

Description

Cisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2

Cisco ASR 9010 Specs

Physical specifications

Height: 36.75 in. (933.45 mm) (21 RU)

Width: 17.38 in. (441.45 mm)

Depth:

?  With doors: 29.03 in. (737.4 mm)

?  Without doors: 28.24 in. (717.3 mm)

Weight:

?  155.6 lb (70.73 kg) (chassis with PEM)

231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) ? RSP, two v2 fan trays, PEMs

Slot orientation

Vertical

Cisco ASR 9000 Series RSP

Dual redundant RSPs with integrated fabric in 2 slots

Cisco ASR 9000 Series line cards

8 line-card slots

?Commons? components

2 RSPs

2 fan trays

2 PEMs (either DC or AC)

1 fan filter

Reliability and availability

Fabric redundancy

Fan redundancy

Feed redundancy

Power-supply redundancy

RSP redundancy

Software redundancy

Rack mounting

19-in. default

21- and 23-in. adapters available

Note: Minimum 17.75-in. opening between posts is needed for proper operation

Cabinet mounting

Yes

Note: Doors not recommended in enclosed cabinets

Wall mounting

No

Airflow

Front-to-back

Performance

Fabric

One per RSP:

?  Active/active nonblocking operation mode in dual-RSP redundant configuration

?  Fully redundant in dual-RSP redundant configuration

?  Built-in service-intelligence and traffic-prioritization capability

Thermal

Two fan trays:

?  12 high-efficiency fans per tray

?  Variable-speed fans for optimal thermal performance

?  No single point of failure

Modularity

Pay-as-you-grow power for future scalability, available in AC and DC.

Multiple power module types:

?  6 kW and 3 kW AC power modules

?  4.4 kW and 2.1 kW DC power modules

Note: Mixing of AC and DC modules is not supported

Redundancy

?  AC: N+N redundancy

?  DC: N+1 redundancy

?  Power module redundancy

?  A/B Feed redundancy

?  PEM redundancy

Power zones

No power zone restrictions

Fully load-sharing power infrastructure

Power input

Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)

Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)

Power-module airflow

Front-to-back

Environmental Specifications

Operating temperature (nominal)

41 to 104?F (5 to 40?C)

Operating temperature (short-term)

ASR 9006: 23 to 131?F (-5 to 55?C)

ASR 9010: 23 to 122?F (-5 to 50?C)

Operating humidity (nominal) (relative humidity)

5 to 90%

Storage temperature

-40 to 158?F (-40 to 70?C)

Storage (relative humidity)

5 to 93%

Operating altitude

-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Regulatory Compliance

Network Equipment Building Standards (NEBS)

Cisco ASR 9010 Routers are designed to meet:

?  SR-3580: NEBS Criteria Levels (Level 3)

?  GR-1089-CORE: NEBS EMC and Safety

?  GR-63-CORE: NEBS Physical Protection

?  VZ.TPR.9205: Verizon TEEER

ETSI standards

Cisco ASR 9010 Routers are designed to meet:

?  EN300 386: Telecommunications Network Equipment (EMC)

?  ETSI 300 019 Storage Class 1.1

?  ETSI 300 019 Transportation Class 2.3

?  ETSI 300 019 Stationary Use Class 3.1

EMC standards emission

Cisco ASR 9010 Routers are designed to meet:

?  FCC Class 47CFR15 A

?  ICES 003 Class A

?  AS/NZS CISRP22 Class A

?  CISPR 22 (EN55022) Class A

?  VCCI Class A

?  BSMI Class A

?  IEC/EN 61000-3-12: Power Line Harmonics

?  IEC/EN 61000-3-11: Voltage Fluctuations and Flicker

?  EN55022: Information Technology Equipment (Emissions)

?  EN 50121-4: Railway EMC

EMC standards immunity

Cisco ASR 9010 Routers are designed to meet:

?  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)

?  IEC/EN-61000-4-3: Radiated Immunity (10V/m)

?  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)

?  IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)

?  IEC/EN-61000-4-5: Signal Surge Ports (1kV)

?  IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)

?  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)

?  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)

?  IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

?  EN55024: Information Technology Equipment (Immunity)

?  EN50082-1/EN-61000-6-1: Generic Immunity Standard

?  EN 50121-4: Railway EMC

Safety

Cisco ASR 9010 Routers are designed to meet:

?  UL/CSA/IEC/EN 60950-1

?  IEC/EN 60825 Laser Safety

?  ACA TS001

?  AS/NZS 60950

?  FDA Code of Federal Regulations Laser Safety