This Cisco module is compatible with all Cisco 7600 Series router chassis, as well as Catalyst? 6500 services switch chassis (excluding the Cisco 7603)
Central Forwarding Engine Compatibility:
This Cisco plug-in module is compatible with Catalyst? 6500 Series supervisor engines 720-3B and 720-3BXL (and later generations), however, it requires switch fabric connectivity; Because of this, the Cisco 7600 SIP 600 is not supported with Supervisor Engine 32
Distributed Forwarding Card (DFC):
DFC-3BXL
Supports up to 24 Mpps, distributed forwarding
Supports up to one million hardware forwarding entries and up to 256,000 NetFlow entries
Slot Configuration:
Per each Cisco 7600 SIP 600 plug-in module, one single-height or double-height shared port adapter (SPA)
Memory:
Route memory: 1GB
Packet memory: 256MB
Supported Shared Port Adapters:
Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter (pluggable IEEE LAN PHY XFP optics)
Cisco 10-Port Gigabit Ethernet Shared Port Adapter (SFP pluggable optics)
Cisco 5-Port Gigabit Ethernet Shared Port Adapter (SFP pluggable optics)
Cisco 1-Port OC-192/STM-64 POS Shared Port Adapter (XFP pluggable optics)
Cisco 1-Port OC-192/STM-64 POS Shared Port Adapter (long-reach fixed optics)
Link Encapsulations:
Ethernet II (with optional IEEE 802.1q encapsulation)
Packet over SONET/SDH (POS) with either Point-to-Point Protocol (PPP) or Cisco High-Level Data Link Control (HDLC) encapsulation
Hardware Queues:
8000 queues dynamically shared between ingress and egress processing
Hierarchical Quality of Service (HQoS): Supports up to 1000 parent queues max.
Management Information Base (MIBs):
Cisco Entity MIB (CISCO-ENTITY-MIB)
Cisco Entity Asset MIB
Cisco Entity Field-Replaceable Unit (FRU) Control MIB
Cisco Entity Alarm MIB
Interface IF MIB (RFC 2233)
Definitions of Managed Objects for Bridges (RFC 1493)
Evolution of Interfaces Group of MIB-II (RFC 1573)
Simple Network Management Protocol (SNMP) MIB II (RFC 1213)
Remote Monitoring (RMON) MIB (RFC 1757)
Switch Monitoring (SMON) MIB
Features & Benefits
Modularity:
One Shared Port Adapter (SPA) per Cisco 7600 SIP 600 module
Offers supercharged, impenetrable services while sustaining an alluring footprint and scalability
Performance:
Up to 24 millions of packets per second (Mpps)
This plug-in module is capable of line-rate performance with 41-byte IP packets
Packet Memory:
256MB
Supports up to 200 ms combined bidirectional buffering
Switch Fabric Connectivity:
20-Gbps fabric channel
Uses 720-Gbps fabric modules for data forwarding
Online Insertion & Removal (OIR):
Supports OIR of the SIP & SPA
Delivers hitless Online Insertion & Removal to reduce the impact of add, change and remove operations
Environmental Guidelines
Operating Temp. Range:
32??104?F (0??40?C)
Storage Temp. Range:
-40??167?F (-40??75?C)
Relative Humidity Range:
10 to 90% noncondensing humidity
Operating Altitude Range:
UL Approval: -60m to 2000m (up to 1.25 miles)
The Cisco 7600 SIP 600 module has been functionally tested to operate up to 3000m.