The HWIC-4SHDSL 4-pair High-Speed WAN Interface Card provide G.SHDSL connectivity to a Wide Area Network.The 4-pair symmetric G.SHDSL HWIC also allows bonding single or dual-pair G.SHDSL ports up to a single 8-wire interface with increased bandwidth by using Inverse Multiplexing over ATM (IMA) or data interleaving with M-pair mode. These cards are supported in all integrated services routers that have HWIC slots.
Technical Information
Application/Usage:
Wide Area Network
Interfaces/Ports
Interfaces/Ports:
1 x RJ-11 G.SHDSL WAN
Media & Performance
Connectivity Media:
Copper G.SHDSL
Data Transfer Rate:
9.20 Mbps G.SHDSL
Management & Protocols
Digital Signaling Protocol:
SHDSL
Protocols & Specifications:
ITU G.991.2 (G.shdsl)
Environmental Conditions
Temperature:
32?F (0?C) to 104?F (40?C) Operating
-4?F (-20?C) to 149?F (65?C) Storage
Humidity:
10% to 90% Non-condensing Relative Humidity
Physical Characteristics
Dimensions:
0.7" Height x 2.8" Width x 4.0" Depth
Weight (Approximate):
3.52 oz
Miscellaneous
Additional Information:
œ Based on ITU Recommendation G.991.2
œ Offers symmetrical WAN speeds of 2.304 Mbps per pair up to 9.2 Mbps over four pairs on the 4-pair by bonding with IMA Version 1.1
œ Supports Wetting Current
œ Sustains up to 8 permanent virtual circuits (PVCs) per HWIC
œOffers extensive ATM class-of-service (CoS) and IP quality-of-service (QoS) support
œThe minimum Cisco IOS Software Release required for the G.SHDSL HWICs