The store will not work correctly when cookies are disabled.
We Accept POs from Fortune 1000 Companies, Government Agencies, Universities, Schools and Colleges
WS-X4712-SFP+E - Cisco Catalyst 4500 Series WS-X4712-SFP+E 12 x Ports 10GBase-X SFP+ Line Card
WS-X4712-SFP+E - Cisco Catalyst 4500 E-Series 12 x Ports SFP+ 10GBase-T Plug in Module Gigabit Ethernet Switch Module
Manufacturer: Cisco
Mfr. Part#:: WS-X4712-SFP+E
Item Overview
Availability:
In Stock
Anywhere
Delivery Option
Free Ground in UAE
2 to 6 days (Varies by location)
Return & Warranty
30 days return
WS-X4712-SFP+E - Cisco Catalyst 4500 E-Series 12 x Ports SFP+ 10GBase-T Plug in Module Gigabit Ethernet Switch Module
More Information
HWIC-2CE1T1-PRI Specification
HWIC-2CE1T1-PRI Specification
|
Description
|
2 port channelized T1/E1, and PRI HWIC (data only) Cisco Router High-Speed WAN Interface card
|
Diagnostic Loopback Support
|
? E1 loopback modes:
? Controller local loopback
? Interface local loopback
? T1 loopback modes:
? Interface local loopback
? Interface remote loopback
? Controller local loopback
? Controller remote loopback
? CSU loopback modes for T1 CSU:
? Data terminal equipment (DTE) loopback
? Network loopback
? Payload loopback
|
Alarm Detection
|
? Yellow Alarm-Receive/Send from/to network
? Blue Alarm-Receive alarm indication signal (AIS) from network
? Red Alarm-Loss of network signal
|
Relevant MIB Support
|
? T1 MIB (RFC1406-MIB)
? Cisco Integrated DSU/CSU MIB (CISCO-ICSUDSU-MIB)
|
Remote Management
|
? Cisco CNS 2100 Series Intelligence Engine (IE2100)
? CiscoWorks
|
Signaling Debugging
|
? ISDN Q.921 and Q.931 decode
? All other previously existing applicable Cisco IOS Software debugs
|
Dimensions (H x W x D)
|
? HWIC-2CE1T1-PRI: 0.75 x 3.08 X 4.74 in.
? (1.91 x 7.82 x 12.04 cm)
|
Weight
|
? HWIC-2CE1T1-PRI: 0.19 lb (0.09 kg)
|
Operating Temperature
|
? 32 to 104?F (0 to 40?C)
|
Nonoperating Temperature
|
? -40 to 158? F (-40 to 70?C)
|
Relative Humidity
|
? 5-95% noncondensing
|
LEDs
|
LEDs per port
? Carrier Detect/Loopback (CD/LP):
? Off = No carrier detect
? Green On = Carrier detect
? Yellow On = Port in loopback mode
? Alarm (AL):
? Off = No alarms
? Yellow On = Port in alarm mode
LEDs per module (on NM-8CE1T1-PRI only):
? EN:
? Off = Card not available
? On = Card enabled
|
Ports
|
? 1, 2, or 8 T1/E1 ports on RJ-48C connectors
|
Line Bit Rate (per Port)
|
? E1: (2.048 Mbps)
? T1: (1.544 Mbps)
|
Line Coding
|
? E1: High-density bipolar three (HDB3 )
? T1: Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS
|
Framing Formats
|
? E1: CRC4
? T1: Super Frame (SF) and Extended Super Frame (ESF)
|
Output Levels
|
? E1: short-haul/long-haul
? T1 (line build-out [LBO]): 0, -7.5, or -15 dB
|
|
Condition |
Refurbished |