Cisco MS130-24P-HW Meraki 24-Port 1G PoE+ 4-Port 1G SFP Switch

The Cisco Meraki MS130-24P-HW is a cloud-managed 24-port Gigabit Ethernet Layer 2 switch designed for branch offices, enterprise access networks, retail, education, healthcare, and campus deployments. It features 24 Gigabit PoE+ ports, 4 dedicated 1Gb SFP uplink ports, and a 370W PoE power budget to support a wide range of network devices. Managed through the Meraki Dashboard, it offers centralized cloud management, zero-touch provisioning, enterprise-grade security, advanced monitoring, and simplified network administration for reliable and scalable business connectivity.

Applications & Use Cases:

1. Enterprise access networks
2. Branch office networking
3. Retail environments
4. Educational institutions
5. Healthcare facilities
6. Hospitality deployments
7. IP surveillance systems
8. Wireless access point connectivity
9. VoIP phone deployments
10. IoT device connectivity

Key Specifications:

1. Product Series: MS130
2. Product Type: Cloud-Managed Ethernet Switch
3. Switch Type: Layer 2 Managed Switch
4. Form Factor: 1U Rack Mount
5. Management: Cisco Meraki Cloud Dashboard
6. Deployment: Enterprise Access Switch
7. Total Ports: 29
8. Network Ports: 24x 10/100/1000 Gigabit Ethernet RJ-45
9. PoE Standard: IEEE 802.3af/at (PoE+)
10. Maximum PoE per Port: 30W
11. Total PoE Budget: 370W
12. Uplink Ports: 4x 1Gb SFP
13. Dedicated Management Port: 1 × RJ-45
14. Switching Capacity: 56Gbps
15. Forwarding Rate: 41.67Mpps
16. MAC Address Table: 16,000 Entries
17. Jumbo Frame Support: Up to 9,576 Bytes
18. VLAN Support: Yes
19. Maximum VLAN IDs: 4,094
20. Quality of Service (QoS): Yes
21. Link Aggregation: IEEE 802.3ad (LACP)
22. Spanning Tree Protocols: STP, RSTP
23. DHCP Snooping: Yes
24. DHCP Relay: Yes
25. IGMP Snooping: Yes
26. IPv6 Support: Yes
27. Multicast Support: Yes
28. Port Mirroring: Yes
29. Access Control Lists (ACLs): Yes
30. 802.1X Port Authentication: Yes
31. Voice VLAN: Supported
32. Loop Protection: Supported
33. Storm Control: Supported
34. Static Routing: No (Layer 2 Switch)
35. Cloud Monitoring: Yes
36. Zero-Touch Provisioning: Supported
37. Remote Packet Capture: Supported
38. Firmware Updates: Automatic via Meraki Cloud
39. Virtual Stacking: Supported
40. Physical Stacking: Not Supported
41. Power Supply: Internal AC
42. Input Voltage: 100–240 VAC
43. Input Frequency: 50–60 Hz
44. Maximum Power Consumption: 406W
45. Idle Power Consumption: 32W
46. Cooling: Active (Fan-Cooled)
47. MTBF: 760,000 Hours
48. Operating Temperature: 0°C to 45°C (32°F to 113°F)
49. Storage Temperature: -20°C to 70°C (-4°F to 158°F)
50. Operating Humidity: 5%–95% Non-Condensing
51. Height: 1.73in (4.4 cm)
52. Width: 17.32in (44.0 cm)
53. Depth: 9.84in (25.0 cm)
54. Weight: 8.9lb (4.04 kg)
55. Rack Mount Kit: Included

Network Features:

1. Layer 2 switching
2. Cloud-managed architecture
3. Zero-touch deployment
4. VLAN segmentation
5. DHCP Relay
6. DHCP Snooping
7. 802.1X authentication
8. RADIUS authentication
9. Voice VLAN
10. LACP Link Aggregation
11. STP / RSTP
12. Loop Detection
13. Port Mirroring
14. QoS
15. IGMP Snooping
16. IPv6 support
17. Remote diagnostics
18. Event logging
19. Automatic firmware upgrades
20. Virtual stacking
21. Secure Dashboard management

Interfaces:

Front Panel

1. 24x Gigabit RJ-45 PoE+ Ports
2. 4x 1Gb SFP Uplink Slots
3. Status LEDs
4. Reset Button

Rear Panel:

1. AC Power Connector
2. Internal Power Supply
3. Cooling Fans